The formation of tribofilms of MoS₂ nanotubes on steel and DLC-coated surfaces

M. Kalin, J. Kogovšek, J. Kovač, M. Remškar

Tribology Letters 55 (2014) 381-391.

Abstract

Solid-lubricant nanoparticles as additives in oil provide good tribological properties based on the physical lubrication mechanisms in the contact. For this reason, they are strong candidates for use in the lubrication of diamond-like carbon (DLC) coatings, which only poorly interact with the traditional, chemically based additives. In this study, we focused on how a tribofilm formed from MoS₂ nanotubes is related to the tribological properties of these nanotubes, and then, we analysed such a tribofilm on steel and DLC-coated surfaces using scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy and Auger electron spectroscopy. We demonstrated that when using oil containing MoS₂ nanoparticles, the formation of a tribofilm is a key factor in decreasing the friction for the steel and DLC-coated contacts. The major difference between the steel and the DLC contacts is the extent to which the MoS₂-based tribofilm covers the surface, which is 20 % in the case of the DLC/DLC contacts, but almost 40 % in the case of the steel/steel contacts. Moreover, the MoS₂-based tribofilm was found to be more oxidized on the DLC surface than on the steel surface. Nevertheless, we found that the chemical and functional properties of the MoS₂-based tribofilm are very similar, or even the same, for both the steel and DLC-coated surfaces. No direct evidence of any chemical reactions between the MoS₂ and the steel or DLC coating was observed.

 

Keywords: DLC, AES, tribofilm, jeklo, MoS₂ nanocevke, XPS, olje


Izvoz bibliografije